Handle BW1 + Key K4 + Escutcheon PZ57

Surprise your visitors with beautiful door hardware that is currently on special offer!

This special set includes an elegant round handle wood/black BW1, which is not only visually attractive but also comfortable to use. Part of the set is also a stylish black key K4, which is a perfect complement to your doors.But that's not all! With this door hardware, you also get a black escutcheon PZ 57, perfectly matching the black door accessories.

When ordering, it is necessary to define the type of material into which the handle will be mounted and also the door opening direction.

Handle BW1 is a luxurious accessory that will give your doors a unique character. With black metal mounting and offset design, this handle is an ideal choice for people looking for a luxurious accessory for their home entrance. Revive your doors and give them a stylish and modern look.

Protect the handle from sun and rain by placing doors in a shelter or under an overhang. This step will extend its lifespan and preserve its beauty.

To keep the handle in perfect condition, simple treatment with a wood care set once a year is sufficient.

One-sided key with a square rosette under the key and a square rosette for the lock cylinder in black finish RAL 9005.

The lock cylinder rosette is attached to two riveting nuts using a screw with metric thread - used for aluminum doors. It is possible to replace this connecting material with 4 self-tapping screws - used for plastic doors. Self-tapping screws should be anchored in the steel reinforcement of the plastic profile system. The square shaft is inserted into the lock and then tightened with a nut. In this case, the square shaft functions as an anchoring element on which the key is mounted. This type of mounting is suitable for handle/key combination.

We do not recommend using keys with handles that are not prepared for one-sided mounting.

The exterior rosette PZ 57 is standard delivered in black finish RAL 9005. It is suitable for common cylindrical lock cylinders. The rosette height is 12mm. The lock cylinder should therefore not protrude significantly more than 12 mm.

During installation, it is necessary to pre-drill a hole with a diameter of 3 mm with a spacing of 48 mm. The rosette is pushed on and secured after inserting the lock cylinder. The rosette cannot be dismounted without removing the lock cylinder (if the lock cylinder protrudes at least 9 mm)