Handle H1 + Key K1 + Security Rosette PZ60

Surprise your visitors with beautiful door fittings that are currently on special offer!

This special set includes an elegant stainless steel circular handle H1, which is not only visually attractive but also comfortable to use. The set also includes a stylish key K1, which is a perfect complement to your doors.But that's not all! With these door fittings, you also get a security rosette PZ 60, which ensures maximum protection and safety.

When ordering, it is necessary to specify the type of material into which the handle will be mounted and also the door opening direction.

A traditional elegant handle in stainless steel AISI 304 quality. This is the best-selling handle, whose quality has been tested by several thousand of our customers. The handle is designed for installation in entrance door wings - not in the door panel.

The door handle can be mounted on plastic or aluminum entrance doors. The handle's mounting hole spacing is designed so that the handle does not bend. The handle rod is standard delivered with a diameter of 30 mm and a wall thickness of 1.5 mm. For longer dimensions, the handle is used with a rod of 40 mm diameter. For extreme oversized dimensions, a rod with a thickness of 50 mm can be used. The handle can be supplied up to a length of 3500 mm.

These handles are in stock for immediate pickup.

If you require a different handle length, we can provide it for you. You should expect a longer delivery time of 4-6 weeks.

Single-sided key with an oval rosette under the key and a rosette for the lock cylinder.

The rosette for the lock cylinder is attached with two screws. The square shaft is inserted into the lock and then tightened with a nut. In this case, the square shaft functions as an anchoring element on which the key is mounted. This mounting method is suitable for handle/key combinations.

We do not recommend using keys with handles that are not prepared for single-sided mounting.

Rosette PZ60

The exterior rosette PZ 60 is standard delivered in stainless steel. The rosette has a lock cylinder cover. It is suitable for common cylindrical lock cylinders that protrude to the exterior in the range of 6-7 mm. The rosette height is 11.5 mm.

During installation, it is necessary to prepare a 3mm hole with a spacing of 50 mm. The rosette is pushed on and secured after inserting the lock cylinder. The rosette cannot be dismounted without removing the lock cylinder.

Rosette PZ58

The exterior rosette PZ 58 is standard delivered in stainless steel. The rosette is without lock cylinder cover. It is suitable for common cylindrical lock cylinders. The rosette height is 6 mm. The lock cylinder should not protrude more than 6 mm.

During installation, it is necessary to prepare a 3mm hole with a spacing of 50 mm. The rosette is pushed on and secured after inserting the lock cylinder. The rosette cannot be dismounted without removing the lock cylinder (if the lock cylinder protrudes at least 4 mm).