Handle B1 + Key K4 + Escutcheon PZ 57

Complete coordinated action set of handle, key, and security rosette for entrance doors. When ordering, it is necessary to define the type of material into which the handle will be mounted and also the door opening direction. Upon request, the set can be supplied in any other RAL color with a longer delivery time, usually 4 to 8 weeks.

Traditional elegant handle in black RAL9005 finish. This is the best-selling handle in black color. The handle is designed for installation in the wing of entrance doors for a family house - not into the door panel.

The door handle can be mounted on plastic or aluminum entrance doors. The handle's lever spacing is designed so that the handle does not bend. The handle rod is standard delivered with a diameter of 30 mm with a wall thickness of 1.5 mm. In case of longer dimensions, the handle is used with a rod of 40 mm diameter. The handle can be supplied up to a length of 2600 mm.

These handles are in stock for immediate pickup.

If you require a different handle length, we can provide it for you. You should expect a longer delivery time of 4-6 weeks.

One-sided key with square rosette under the key and square rosette for the lock cylinder in black RAL finish.

The rosette for the lock cylinder is attached to two riveting nuts using a screw with metric thread - used for aluminum doors. It is possible to replace this connecting material with 4 self-tapping screws - used for plastic doors. Self-tapping screws should be anchored in the steel reinforcement of the plastic profile system. The square shaft is inserted into the lock and then tightened with a nut. In this case, the square shaft functions as an anchoring element on which the key is mounted. This mounting method is suitable for handle/key combination.

We do not recommend using keys with handles that are not prepared for one-sided mounting.

Exterior rosette PZ 57 is standard delivered in black RAL 9005 finish. It is suitable for common cylindrical lock cylinders. The rosette height is 12mm. The lock cylinder should therefore not protrude more than 12 mm.

During installation, it is necessary to prepare a hole with a diameter of 3 mm with a spacing of 48 mm. The rosette is pushed on and secured after inserting the lock cylinder. The rosette cannot be dismounted without removing the lock cylinder (if the lock cylinder protrudes at least 9 mm)

Upon request, the rosette can be supplied in any other RAL color with a longer delivery time of 4-8 weeks

Possibility to order in any RAL color.